Rhino Pitcher Rinser 300mm


Rhino Coffee Gear’s new pitcher rinser design brings with it a number of features you have been asking for!

Better Drainage – the drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.

Bigger Vessels – the large actuator plate makes it useful across a broader range of equipment.

Optional Spinjet Spray Mechanism – the new Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers, milk pitchers, and cleaning coffee grounds and other residues that tend to hold firm.

Install Parts – included with each rinser you will find some fittings and hoses to make installation easier ( 3/8 push-fit inlet plus elbow option, 1 metre of inlet hose and drain hose with clip).

NSF Certified – All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.

Dimensions – 231mm (W) x 354mm (H) (approx.)

Drain Hose Size – 25mm/1 inch

Please Note: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on mains water line. Click here to view.
RHPR300 Top Diagram

Please note: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only. 

Click here for Installation Instructions

Click here for Cleaning Instructions.